Installation

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the data badge which is fitted on the back panel. This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. particular attention should be given to the relevant requirements regarding ventilation.

MODEL NUMBERS KD6G35, KDP60E

Category II2H3+ (GB)

LOCATION

The cooker may be located in a kitchen, kitchen/

GB

diner or a bed-sitting room, but not in a room

 

containing a bath or shower. The cooker must not be

 

installed in a bed-sitting room of less than 20m3.

 

When adjusted for use on Butane (G30) or Propane

 

(G31), the cooker must not be installed in a room or

 

internal space below ground level, e.g. in a

 

basement.

 

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440: Part 2.

These models are set to burn NATURAL GAS (G20) at 20 mbar but can be converted for use on BUTANE (G30) at 28-30mbar or PROPANE (G31) at 37mbar with the use of the LPG conversion kit that can be obtained free of charge, if you contact our Genuine Parts and Accessories department (see Key Contacts, back page).

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law. In the UK, CORGI registered installers work to safe standards of practice. The cooker must also be installed in accordance with BS 6172. Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2 should be consulted to determine air vent requirements.

TECHNICAL DATA

Gas connection

Rp ½ (½" BSP female)

Pressure test point

Front left hotplate injector

Gas rate adjustment

None

Aeration adjustment

None

Electrical connection

4mm2 twin and earth

 

230/240V a.c. 50Hz.

 

 

G20 at 20mbar

G30 at 28-30mbar

 

 

G31 at 37mbar

 

 

 

 

 

 

 

 

 

 

 

Burner

HEAT INPUT

INJECTOR

HEAT INPUT

INJECTOR

 

 

 

 

 

 

 

HOTPLATE

3.0 kW

116

3.0 kW (220g/h)

86

 

Front Left

 

 

 

 

 

 

 

 

 

 

 

 

HOTPLATE

2.0 kW

103

2.0 kW (145g/h)

70

 

Rear Left and Rear Right

 

 

 

 

 

 

 

 

 

 

 

 

HOTPLATE

1.1 kW

79

1.0 kW (70g/h)

50

 

Front Right

 

 

 

 

 

 

 

 

 

 

 

 

GRILL

 

2.4 / 2.7 kW

 

 

 

 

 

 

 

 

MAIN OVEN

 

1.8 / 2.0 kW

 

 

 

 

 

 

 

 

TOP OVEN

 

1.7 / 1.9 kW

 

 

 

 

 

 

 

 

 

 

 

 

 

13

Page 13
Image 13
Indesit KD6G35, KDP60E operating instructions Installation

KD6G35, KDP60E specifications

The Indesit KDP60E and KD6G35 are two highly regarded models in the realm of kitchen appliances, particularly known for their efficiency and practicality. These cookers are designed to meet the demands of modern kitchens while providing impeccable cooking experiences.

The Indesit KDP60E is a multifunctional double oven that boasts a variety of cooking options. With a total capacity of 102 liters, it offers ample space for preparing multiple dishes simultaneously. The top oven features a conventional function, perfect for dishes that require gentle heat, while the larger bottom oven uses fan assistance to ensure even cooking. A key characteristic of the KDP60E is its user-friendly interface, complete with mechanical controls and a clear display, allowing users to easily select the desired cooking mode.

One of the standout technologies of the KDP60E is its Energy Class A rating, which signifies efficiency in energy consumption. This model is equipped with a unique Hydro Easy Clean function that uses steam to break down dirt and grease, making the cleaning process quick and hassle-free. Additionally, the KDP60E includes four cooking zones and a1900W rapid heat burner, providing versatile options for simultaneous food preparation.

On the other hand, the Indesit KD6G35 is another excellent option, primarily known for its gas cooking capabilities. The KD6G35 features five gas burners, including a large wok burner for high-heat cooking or stir-frying. This model is acclaimed for its precise temperature control, allowing culinary enthusiasts to achieve desired results with exactitude.

The design of the KD6G35 is equally impressive, featuring a stylish stainless steel finish that not only looks great but ensures durability. Similar to the KDP60E, it also includes an energy-efficient oven with a capacity conducive to accommodating larger meals. A standout feature is the integrated grill, which facilitates browning and crisping of dishes for that perfect finish.

Both models prioritize safety, incorporating flame failure devices that cut off the gas supply if the flame goes out. The Indesit KDP60E and KD6G35 exemplify innovation in kitchen technology, combining aesthetic appeal with functionality to elevate the cooking experience while promoting ease of use and maintenance.