Manuals / Lincoln Electric / Power Tools / Welder

Lincoln Electric IM909 manual Output CABLES, Connections and Limitations, Work Cable Connection

Models: IM909

1 46
Download 46 pages 29.39 Kb
Page 14
Image 14

A-5

INSTALLATION

A-5

 

 

 

Welders are shipped connected for the highest input voltage as listed on the rating plate. To change this connection, designations on the reconnect panel LOW, MID, and HIGH correspond to the name plated input voltages of a triple voltage welder. Dual voltage welders use only LOW and HIGH.

EXAMPLE: On a 208/230/460 volt welder, LOW is 208V, MID is 230V, and HIGH is 460V.

Note: Export model has a voltage range for LOW and MID connections: LOW is 220-230V, MID is 380-400V and High is 415V.

Reconnect the jumper strap to the terminal stud corre- sponding to the input voltage level used. Make sure all connections are tight.

Fuse the input circuit with the recommended super lag fuses or delay type1 circuit breakers. Choose an input and grounding wire size according to local or national codes or use Section A-2. Using fuses or circuit break- ers smaller than recommended may result in "nui- sance" tripping from welder inrush currents even if not welding at high currents.

Unbalanced AC TIG welding draws higher input cur- rents than those for Stick, DC TIG, or Balanced AC TIG welding. The welder is designed for these higher input currents. However, where unbalanced AC TIG welding above 275 amps is planned, the higher input currents require larger input wire sizes and fuses per Section A- 2.

OUTPUT CABLES, CONNECTIONS AND LIMITATIONS

WARNING

•To avoid being startled by a high frequency shock, keep the TIG torch and cables in good condition

•Turn the power switch of the power source OFF before installing adapters on cable or when con- necting or disconnecting adapter plugs to power source.

-----------------------------------------------------------------------

Refer to Figure A.2 for the location of the WORK and STICK terminals, as well as the TIG Torch connection panel.

Recommended Cable Sizes for Combined Lengths of Copper Work and Electrode Cables using 75o C Wire:

Machine Rating

0 to 100 Ft.

101 to 200 Ft

201 to 250 Ft

 

 

 

 

375A/40%

#1 (42.4 mm2)

1/0 (53.5 mm2)

2/0 (67.4 mm2)

WORK CABLE CONNECTION

A 15’ (2/0) weld cable with clamp is available (K2150-1), or included with the Precision TIG Welding Package model. Otherwise, it is user provided.

With power source off, connect a separate work cable to the 1/2-13 threaded "WORK" stud of the welder, and secure a tight connection with the flange nut provided. The work cable should be routed through the cable strain relief hole provided in the base directly below the welding output terminal.

Note: If the Precision TIG is equipped with an Under- Cooler or Under-Storage unit, the coiled work cable and clamp, or excess work cable length, may be con- veniently stored in the drawer while remaining con- nected.

STICK ELECTRODE CABLE CONNECTION

If manual stick welding is desired, with power source off, connect a stick electrode cable to the 1/2-13 threaded "STICK Electrode" stud of the welder, and secure a tight connection with the flange nut provided. The electrode cable should be routed through the cable strain relief hole provided in the base directly below the welding output terminal.

WARNING

DISCONNECT STICK ELECTRODE WELDING CABLE WHEN TIG WELDING.

EVEN THOUGH HI-FREQ IS NOT APPLIED TO THE PRECISION TIG STICK TERMINAL, IT WILL BE ELECTRICALLY "HOT" TO WORK WHEN TIG WELDING.

------------------------------------------------------------------------

PRECISION TIG 375

Page 13 Page 15
Page 14
Image 14
Lincoln Electric IM909 Output CABLES, Connections and Limitations, Work Cable Connection, Stick Electrode Cable Connection
Page 13 Page 15

IM909 specifications

Lincoln Electric IM909 is an innovative industrial multi-process inverter welder designed to provide exceptional flexibility, performance, and user-friendly operation for a wide range of welding applications. This versatile machine is suitable for both novice and experienced welders, making it an ideal choice for workshops, fabrication shops, and maintenance operations.

At the core of the IM909 is its multi-process capability, allowing users to perform MIG, TIG, and stick welding operations. This means that a single machine can cater to various welding needs, from thin sheet metal to heavy structural projects, providing great versatility in welding materials like steel, stainless steel, and aluminum. The IM909 is designed to meet the demands of today’s welding professionals, enabling seamless transitions between different welding processes without sacrificing performance.

One of the standout features of the IM909 is its advanced inverter technology. The inverter design not only makes the welder compact and lightweight but also enhances energy efficiency and improves arc stability. This results in better control over the welding process, leading to higher quality welds with reduced spatter. Additionally, the IM909 boasts a wide output range, allowing it to handle various welding thicknesses effectively.

Another significant characteristic of the IM909 is its user-friendly interface. The machine comes equipped with a digital display that provides clear readouts of current settings, making it easy for users to monitor and adjust parameters on the fly. Moreover, the intuitive controls simplify the setup process, streamlining operations for users of all experience levels.

Safety is always a top priority in welding operations, and the IM909 integrates several protective features, including over-temperature protection and circuit breaker safeguards. These elements ensure the durability of the machine and protect both the welder and the equipment from potential hazards.

In conclusion, the Lincoln Electric IM909 multi-process inverter welder stands out as a reliable, efficient, and adaptable welding solution. Its combination of advanced inverter technology, multi-process capabilities, user-friendly operation, and safety features makes it an excellent investment for any welding professional looking for quality and versatility in their equipment. Whether performing intricate fabrication work or tackling heavy-duty welding tasks, the IM909 delivers exceptional performance across a wide range of applications.