COUGAR™ Push Pull Gun - OPERATING INSTRUCTIONS
Drive Roll Groove Selection
The drive roll has two grooves. A wider groove for feeding 3/64” (.047) wire and a narrow groove for feeding .035” (0.9mm) wire to accommodate changes in the wire size used. Changing between the grooves simply requires reversing the drive roll.
A. Drive Roll Orientation
1.Drive roll is scribed with wire groove size. For appropriate groove orientation, ensure desired size callout is facing up and visible.
B. Changing Drive Roll Orientation
1.Flip lid open, then move release lever to the up position.
2.Unscrew thumb screw and remove drive roll
|
|
LID | RELEASE LEVER |
| |
| RELEASE LEVER |
PRESSURE
ADJUSTMENT
KNOB
THUMB SCREW
.035”
3/64”
DRIVE ROLL
6
