INSTALLATION | ||
|
|
|
Read entire installation section before starting installation.
SAFETY PRECAUTIONS
WARNING
ELECTRIC SHOCK can kill.
FIGURE A.1
1
• Only qualified personnel should perform this installation.
• Only personnel that have read and under- | 2 | |
stood the | ||
| ||
should install and operate this equipment. |
| |
• Machine must be plugged into a receptacle |
| |
which is grounded per any national, local |
| |
or other applicable electrical codes. |
| |
• The | 4 | |
| ||
the OFF (“O”) position when installing |
| |
work cable and gun and when connecting | 3 | |
power cord to input power. | ||
|
IDENTIFY AND LOCATE | 6 |
COMPONENTS |
|
If you have not already done so, unpack the | 5 |
140 from its carton and remove all packing material around the
1.
2. Gun and cable assembly(1)
7
8
3.Literature and miscellaneous including:
a)This operating manual
b)3
c) 2 extra .035” (0.9 mm) contact tips | 10 |
| |
d) Hex key wrench for removal of drive roll. | 9 |
4.10 ft (3.0 m) work cable.
5.Work clamp.
6.a) 2lb. spool of .025” (0.6 mm) Super Arc
b)Sample spool of Innershield .035” (0.9 mm)
7.Welding Helmet.
8.Adjustable
9.Instructional video.
10.Nozzle.
For available options and accessories refer to the
Accessories Section of this manual.
1)As shipped from the factory, the