Lincoln Electric STT II dimensions General Options, Wire Feeder Options

RECOMMENDED OPTIONS

GENERAL OPTIONS

Power Source Remote Output

Control

Remotely controls peak and background current. 10 pin remote control with 25 ft. (7.6m) of cable.

Order K942-1

Inverter and Wire Feeder Cart

Rear-wheeled cart includes front casters and no-lift gas bottle platform. Convenient handles allow for easy cable storage while full length side trays store parts and tools. Shipped fully assembled. Small footprint fits through

30 inch door.

Order K1764-1

Dual Cylinder Kit

Permits side-by-side mounting of two full size gas cylinders, with easy loading. For use with K1764-1 cart.

Order K1702-1

STT II Sense Lead Kit

Required to accurately monitor voltage at the arc for heavy duty applications. 25 ft. length included with Invertec STT II. 75 ft. (23m) length.

Order WK1811-75

Coaxial Cable

Recommended for STT and pulse welding when using long distances between feeder and power source.

Order K1796-25

25 ft. (7.6m), 350 amps

Order K1796-50

50 ft. (15.2m), 350 amps

Order K1796-75

75 ft. (22.8m), 325 amps

Order K1796-100

100 ft. (30.4m), 300 amps

GENERAL OPTIONS CONT.

Twist-Mate Cable Plug

For connecting welding cable to output terminal receptacles. For 1/0- 2/0 (50-70mm2) cable.

Order K852-70

Twist-Mate Cable Plug

For connecting welding cable to output terminal receptacles. For 2/0- 3/0 (70-95mm2) cable.

Order K852-95

Twist-Mate Cable Receptacle

For connecting welding cable to Twist-Mate cable plug. For 1/0-2/0 (50-70mm2) cable.

Order K1759-70

Twist-Mate Cable Receptacle

For connecting welding cable to Twist-Mate cable plug. For 2/0-3/0 (70-95mm2) cable.

Order K1759-95

Twist-Mate to Lug Adapter

For connection of lugged cable to Twist-Mate connectors, 18" (457mm) long.

Order K2176-1

WIRE FEEDER OPTIONS

STT-10 Wire Feeder

The sophisticated STT-10 Process Controller was designed specifically to work with the revolutionary STT II power source. Microprocessor controls make it easy to develop optimal procedures and set the range of operator adjustments. Dual procedure control can increase or decrease the energy in the

arc without changing the wire feed speed.

See Publication E8.190

	Invertec® STT® II
[6]	www.lincolnelectric.com