Safety

Return to Master TOC

Electromagnetic Compatibility (EMC)

Conformance

Products displaying the CE mark are in conformity with European Community Council Directive of 15 Dec 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility, 2004/108/EC. It was manufactured in conformity with a national standard that implements a harmonized standard: EN 60974-10 Electromagnetic Compatibility (EMC) Product Standard for Arc Welding Equipment. It is for use with other Lincoln Electric equipment. It is designed for industrial and professional use.

Introduction

All electrical equipment generates small amounts of electromagnetic emission. Electrical emission may be transmitted through power lines or radiated through space, similar to a radio transmitter. When emissions are received by other equipment, electrical interference may result. Electrical emissions may affect many kinds of electrical equipment; other nearby welding equipment, radio and TV reception, numerical controlled machines, telephone systems, computers, etc. Be aware that interference may result and extra precautions may be required when a welding power source is used in a domestic establishment.

Installation and Use

The user is responsible for installing and using the welding equipment according to the manufacturer’s instructions. If electromagnetic disturbances are detected then it shall be the responsibility of the user of the welding equipment to resolve the situation with the technical assistance of the manufacturer. In some cases this remedial action may be as simple as earthing (grounding) the welding circuit, see Note. In other cases it could involve construction of an electromagnetic screen enclosing the power source and the work com- plete with associated input filters. In all cases electromagnetic disturbances must be reduced to the point where they are no longer troublesome.

Note: The welding circuit may or may not be earthed for safety reasons according to national codes. Changing the earthing arrangements should only be authorized by a person who is competent to access whether the changes will increase the risk of injury, e.g., by allowing parallel welding current return paths which may damage the earth circuits of other equip- ment.

Assessment of Area

Before installing welding equipment the user shall make an assessment of potential electromagnetic prob- lems in the surrounding area. The following shall be taken into account:

a)other supply cables, control cables, signaling and telephone cables; above, below and adjacent to the welding equipment;

b)radio and television transmitters and receivers;

c)computer and other control equipment;

d)safety critical equipment, e.g., guarding of industrial equipment;

e)the health of the people around, e.g., the use of pacemakers and hearing aids;

f)equipment used for calibration or measurement

g)the immunity of other equipment in the environment. The user shall ensure that other equipment being used in the environment is compatible. This may require additional protection measures;

h)the time of day that welding or other activities are to be carried out.

INVERTEC® V450-PRO

SVM199-A specifications

Lincoln Electric SVM199-A is a highly advanced welding machine that has garnered attention for its robust features and innovative technologies. This piece of equipment is tailored specifically for professionals in the welding industry, providing a range of functionalities that enhance productivity and efficiency.

One of the standout features of the SVM199-A is its Dual Voltage Input capability. This allows for flexibility in energy sources, making it suitable for a variety of job sites and applications. Users can easily switch between 208V and 230V, ensuring that they can operate efficiently regardless of the electrical setup available.

The machine is equipped with a powerful inverter-based design that significantly reduces its overall weight without compromising performance. This technology not only increases portability but also delivers greater energy efficiency, resulting in lower operational costs. The inverter design allows for quicker arc starts and smoother operation, which is especially beneficial for intricate welding tasks.

The SVM199-A boasts advanced digital controls that simplify the operation for both novice and experienced welders. The intuitive interface allows users to easily set and monitor welding parameters, facilitating optimal settings for various materials and thicknesses. This level of control ensures consistent weld quality and minimizes the risk of defects.

Another impressive characteristic of the SVM199-A is its multi-process functionality. It supports MIG, TIG, and Stick welding, making it versatile for various applications, from thin sheet metal work to heavy-duty repairs. This adaptability is ideal for contractors and welding professionals who often switch between different welding processes.

Additionally, the machine features a robust cooling system designed to prevent overheating during extended use. This capability not only prolongs the lifespan of the machine but also ensures reliable performance even in demanding conditions. The SVM199-A is built to withstand the rigors of frequent usage, emphasizing Lincoln Electric’s commitment to durability and quality.

Safety is paramount in welding operations, and the SVM199-A incorporates several safety features, including thermal overload protection and a protective housing design. These elements work together to safeguard both the machine and the operator, promoting a secure working environment.

In summary, Lincoln Electric's SVM199-A stands out in the welding equipment market due to its combination of advanced technology, user-friendly design, and exceptional performance capabilities. Whether for industrial applications or specialized projects, this machine is engineered to meet the rigorous demands of professionals, making it a valuable addition to any welding toolkit.

Lincoln Electric SVM199-A service manual Safety

Models: SVM199-A

SAFETY