18 |
| TROUBLESHOOTING | 18 | |
|
|
|
|
|
| Observe all Safety Guidelines detailed throughout this manual | |||
|
|
|
|
|
| PROBLEMS |
| POSSIBLE AREAS OF | RECOMMENDED |
| (SYMPTOMS) |
| MISADJUSTMENTS(S) | COURSE OF ACTION |
|
|
|
| |
|
| STICK WELDING PROBLEMS |
| |
Stick electrode “Blasts Off” when arc | 1. | Weld current may be set too |
| |
is struck. |
| high for electrode size. Reduce |
| |
|
|
| current control setting, or use a |
|
|
|
| larger diameter electrode. |
|
|
|
|
| |
Stick electrode “sticks” in the weld | 1. | The weld current may be set too | Contact your Local Lincoln Authorized | |
puddle. |
| low. Increase the current control | Field Service Facility for technical | |
|
|
| setting or use a smaller diame- | troubleshooting assistance. |
|
|
| ter electrode. |
|
|
|
|
|
|
|
|
|
|
|
CAUTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
