Lincoln Electric TIG 275 manual Accessories, Optional Equipment, Factory Installed Options

C-1 ACCESSORIES C-1

OPTIONAL EQUIPMENT

FACTORY INSTALLED OPTIONS

The basic Precision TIG 275 machine is factory equipped with:

•A 3/8" Adapter (S20403-4) for air cooled torch con- nection of a PTA-9 or PTA-17.

FIELD INSTALLED OPTIONS

The following Options/Accessories are available for the Precision TIG 275 and are installed per instructions in this manual and / or provided in the package:

•K1829-1 Precision TIG Advanced Control Panel Provides 2/4-step trigger with adjustable Pulser con- trols and Down slope timer for TIG welding. Also includes adjustable Hot Start and Arc Force internal panel controls for Stick welding, and other user selectable features.

•K1828-1 Under-Cooler Cart

Includes a "cooler-in-a-drawer" with hoses and a lockable storage drawer on a dual bottle undercar- riage (see below).

•K1869-1 Undercarriage

Includes a dual bottle rack with chain and an under- carriage with 5" front casters,10" rear wheels and a handle.

•K1830-1 Water Solenoid Kit

Provides for stopping flow of external water supply. Connects to coolant inlet and cooler receptacle of Precision TIG.

(Can not be used with a water cooler.)

•K870 Foot Amptrol

Single pedal foot activation of arc start switch and output control, with 25’ plug cable.

•K870-1 Start Pedal Foot Amptrol

Independent start pedal on control pedal provides two-stage foot action to easily feel start switch clo- sure at minimum output level for enhanced arc start and crater-fill control. Provided with adjustable, or removable, heel stop and 25’ plug cable.(Refer to Figure B.5)

•K963-3 Hand Amptrol

Fastens to torch for convenient thumb activation of arc start switch and output control, with 25’ plug cable:

•K814 Arc Start Switch

Needed for TIG welding without an Amptrol. Includes 25’ plug cable, and attaches to torch for convenient finger control.

•K1831-1 Power Factor Capacitor Kit

Used when welding at higher output currents to reduce input current and help keep electricity costs to a minimum.

•Magnum® PTA and PTW Series Torches

All Air Cooled or Water-Cooled Magnum® TIG Torches may be used with the PRECISION TIG 275. Connection adapters are only required for Air-Cooled Torches (Refer to Diagrams on A-7):

K2166-1 7/8” Torch Connector for PTA-26 (one piece)

K2166-2 1/2” stud Connector for PTA Torch (two- piece).

K2166-3 3/8” TIG Torch Connector for PTA-9,-17 (one piece). (Included as S20403-4 with Precision TIG models.)

•3100211 Harris Argon Flow Regulator (Includes 10’ hose.)

•K2150-1 Work Lead Assembly

15ft. 2/0 cable with 1/2" stud lug and work clamp.

PRECISION TIG 275