Lincoln Electric V205-T AC/DC Performance, Features, Quality and Reliability, System Selection

A CLOSER LOOK

PERFORMANCE

TIG Welding Stick Welding

The ability to adjust Invertec® V205-T AC/DC’s output frequency allows the operator to control the focus of the arc. This is ideal for critical welds if trying to minimize the heat affected zone in the weld. It is also a benefit for welding on cast aluminum where lower frequency is desired to minimize agitation of impurities in the base metal.

Start-only high frequency in AC mode minimizes high frequency noise emissions.

The Invertec® V205-T AC/DC is also an excellent DC stick welder with such popular Lincoln® electrodes such as Fleetweld® 5P and 5P+, Fleetweld® 35, Fleetweld® 37, Fleetweld® 180 and Excalibur® 7018.

FEATURES

•Selectable high frequency TIG starting for easy arc ignition or Touch-Start™ DC TIG starting for areas where high frequency emissions are a concern.

•Hidden start up menu offers the following additional controls:

–Preflow time for purging gas lines is adjustable between 0 and 25 seconds. Factory preset at 0.5 seconds.

–Selectable AC wave shapes.

–High frequency is standard starting method for TIG. Touch-Start™ TIG may be selected for DC.

–Adjustable DC TIG strike current.

–Adjustable Arc Force for stick mode only.

–Adjustable Hot Start for stick mode only.

–Adjustable AC start power for larger diameter tungsten.

Key Controls
1)	Weld Mode	12)	Digital output current
2)	Up-Slope Time		display
3)	Pre-settable Amperage	13)	2-Step and 4-Step
4)	Down-Slope Time		operation modes
5)	Finish Current	14)	Local/Remote switch
6)	AC Welding Frequency		allows for remote current
7)	AC Balance		controls in TIG welding
8)	Pulse Frequency		mode
9)	Pulse Background	15)	6-pin MS-Type remote
	Current		connector (not shown)
10)	% On-Time Pulse	16)	Integral Twist-Mate™ gas
11)	Adjustable post-flow time		and power connections
			(not shown)
		17)	Starting Current
			(not shown)

13	14	9
1

12

8

3
2	7

10		11	6
4	5

QUALITY AND RELIABILITY

•Thermal and voltage overload protection for long life of internal components.

•Three year Lincoln® warranty on parts and labor.

•Line voltage compensation gives you the option to use remote generator power.

SYSTEM SELECTION

One-Pak®Welding Packages

Order a Lincoln® One-Pak®and get everything you need to complete a welding package – all with one order number. Just add shielding gas.

Invertec® V205-T AC/DC One-Pak®Package — One product number (K2350-2) gets you all this:

Package Contains These Separate Items:
• Invertec® V205-T AC/DC (115/230/1/50/60). .	K1855-4
• TIG-Mate™ 17 Air-Cooled	K2266-1
TIG Torch Starter Pack
• Foot Amptrol®	K870

K1855-4

K2266-1

K870

Invertec ® V205-T AC/DC

[2] www.lin colnelectric.com