9.Power Switch: Use this switch to turn on the mix station after all input devices are already connected to prevent damage to your equipment. Turn the station
on before you turn on amplifiers and turn off amplifiers before you turn off the mix station.
FRONT PANEL FEATURES
1.Input Fader: Controls individual source levels in the mix.
2.Input toggle switch - Selects which source will be live to that channel based on what you have connected to the rear panel input section
3.
4.Replaceable Crossfader - Achieves clean segues between the two input channels. "Hard left" selects Channel 1. "Hard right" selects Channel 2. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other
Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws which hold it in place, lift it out and disconnect it’s cable.
5.Fader Start – Activation allows you to start the CD players from you crossfader. Travel from left to right will start the right CD player and pause the left CD player
6.Mic Input Fader – Adjusts microphone level.
7.Mic 1 Equalizer (EQ) – Adjusts microphone 1 treble and bass levels.
8.Master Stereo EQ – Adjust final master ouput equalization of trevle, middle, and bass levels.
9.Master Fader – Controls the overall outuput level.
10.Stereo/Mono Toggle – Changes the master output between Mono and Stereo.
11.LED METER - Indicates the Master output level.
12.Channel Monitor Selector – Used to route channel audio to your headphones for cueing.
13.Cue Mix Control – Adjusts the headphone blend of master output (PGM) and monitor (CUE) sound.
14.Headphone Level – Adjusts cue volume.
15.Headphone Jacks – Used to connect either 1/8” or 1/4” plugs for audio monitoring with headphones.
CD PLAYER FEATURES
1.OPEN/CLOSE (Disc Tray Open/Close) - Press to load or eject the disc. Each press will open or close the disc tray on the transport. NOTE: Tray will not open unless the disc has been paused. Tray will automatically close after 30 seconds.
2.TIME (Time Button) - Switches the time display between elapsed playing time and remaining time on the track and remaining time on the entire CD.
3.CONT/SING - Will cause just a single track to play or all tracks in order by pressing once or twice.
4.LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. These functions are explained in the next section.
5.TRACK (Track Buttons) - Used to select the track to be played.
6.Folder/ +10 – Selects folder from which tracks are to be played. On a disc which contains no folders, this button is used to advance tracks in increments of 10
7.PROGRAM - Depress this button and the unit will stop and the program indicator will light. Select each track to be programmed and press the PROGRAM button between selections. You can program up to 30 tracks. Press PLAY to start the program. To exit and erase program, either hold the program button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.
