Numark Industries CDMIX3 Search Wheel Outer Ring 3 forward, Pitch BEND/JOG Wheel Inner Ring

8.	PITCH (Pitch Button) - Activates the Pitch Slider.			playing by rotating the wheel clockwise to
	To alternate between ±8% and ±16%, press and			speed up or counterclockwise to slow down.
	hold PITCH button. LED will indicate active setting.			By changing the pitch of one disc with
9.	PITCH SLIDER - The pitch can be changed up to			respect to the pitch of the other disc, the
	±16% by pressing the PITCH button so the PITCH			beats can be matched.
	LED is lit, then moving the sliding fader. The pitch		12.	CUE - Pressing the CUE button during play provides
	will not be changed if the PITCH LED is off.			a return to the position at which play was started.
10.	SEARCH WHEEL (OUTER RING) - 3 forward and 3			If PAUSE is used before CUE, that will become the
	reverse speed positions for searching through			cue point. Alternately pressing the PLAY button and
	songs. The more you turn the wheel in either			the CUE button allows the CD to be played from the
	direction the faster you search through the music.			same position any number of times. The CUE LED
11.	PITCH BEND/JOG WHEEL (INNER RING) - The			will light up from the time the CUE button is pressed
	jog wheel serves 2 functions depending on the			until the CD has been reset to the position at which
	current mode.			play was started. Steady lighting of this LED
	a)	The jog wheel will control a slow frame		indicates the ready condition.
		search when the CD is not playing. To set a	13.	START/PAUSE (Play/Pause Button) - Each
		new frame cue point, spin the wheel then		press of the Play/Pause Button causes the operation
		press play when you have determined the		to change from play to pause or from pause to play.
		proper position. Press CUE to return to the	14.	LOOP IN – Used for setting a start loop point and
		“CUE POINT”.		new cue points during playback.
	b)	When both CD players are playing a CD, the	15.	LOOP OUT – Used for setting the end loop point
		pitch bend function allows the positioning of		and releasing the loop action.
		the bass beats to be matched after the pitch	16.	RELOOP / STUTTER – Depending on mode, as
		of each disc is matched. Either player can		explained further, this button is used for either
		“catch up” or “fall back” to match the other		repeating a previously set loop or seamlessly
		player. The jog wheel will temporarily bend		stuttering on the last set cue point.
		the pitch of the music if the song is already

LCD DISPLAY FEATURES

1.PAUSE: Active when the unit is paused.

2.PLAY: Active while a CD is playing.

3.CUE: Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point.

4.PROGRAM: Used for pre-programming the track order to automatically be played by the unit. This is a great function if you need to leave the CD player alone.

5.TIME MODE: (Elapsed) is for showing time as it is taking place.(Remain) shows how much time is left on a particular track. This function is controlled by the TIME BUTTON.

6.TIME BAR: Shows either time remaining or elapsed depending on the setting of the TIME BUTTON.

7.TRACK NUMBER: Shows the current track that the unit is playing. While searching folders, the selected folder is displayed, denoted by the letter F.

8.TRACK: Lights while unit is in Track Play mode.

9.SINGLE: Shows when the unit is set to play just one track at a time. When this is not lit, the CD will

play continuously through all tracks. This function is controlled by the SING/CONT BUTTON.

10.MP3: Lit when unit is playing an MP3 file.

11.MINUTES: Shows the minutes elapsed or remaining depending on mode setting.

12.SECONDS: Shows the seconds elapsed or remaining depending on mode setting.

13.FRAMES: The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting.

14.LOOP: Indicates when loop is actively playing.

15.PITCH: Shows the percentage change in pitch.

16.PITCH: Is lit when the PITCH BUTTON is active.

17.MATRIX DISPLAY: Displays CD Text or MP3 Tag information. If reading a disc with no encoding, display will read “NO TEXT”. Also displays folder names while searching through folders.