English Manual
English 4
data security, we highly recommend ussing Safe configuration (RAID 1 mode).
3.Fast (RAID 0 Mode): The two physical drives are stripped together so that one larger logical volume mounts on the desktop, offering the maximum possible capacity like in Big mode (the available capacities of each disk are combined) yet with greater speed than the Big mode (the speed of each disk runs faster to a certain level).
Note: If one drive fails, the data on botth disks will become inaccessible.
4.Safe (RAID 1 Mode): The two physical drives are “mirrored” (RRAID 1) so that one single logical volume mounts on the desktop. All of the data on one drive will be recoverable from thhe other drive (the available capacity of one drive cannot exceed the available capacity of the other drive).
Note: If one physical disk fails, the data can be immediately recovered from the second disk. No data will be lost if one drive fails.
5.Safe33: RAID 1 (SAFE 33%) + (BIG 67%), 33% of me mory space on both hard drives will be operating under RAAID 1 mode, and the rest of the hard drive memory on both disks will be assorted into BIG.
6.Safe50: RAID 1 (SAFE 50%) + (BIG 50%), 50% of the memory in both disks will be RAID 1, and the rest of the hard drive memory on both disks will be assorted into BIG.
7.GUI ONLY: Usee SteelVine Manager Software to configure the HDD Mode.
Only under GUI ONLY mode, SteelViine Manage can change the hard drive memory mode, on other modes, SteelVine Manager can monitor the hard drive statue, not change that.
Note： Changing the Mobile Rack hard drive storage policy，according to the above seven mode , need to turn the Mode Select to a new position which you want to change，then press Mode change button to reset，so the latest storage policy take effect.
After effected, you need to click“My
Computer”“Management””Hard drivve management” then
