User manual 15” & 17” LCD Terminals
5
C B A
Installing the long rear bracket s
Please select the appropriate brack ets according to the distance between your 19”
rails (

see Important note on page 3

) and install them as per the pictures.
You will need the front support
brackets (A), outer slider brackets (B),
inner slider bracket (C).....
....and either the short or long L-
bracket (DS and DL).
First, position the front support bracket
(A) with the outer and inner slider
brackets (B, C) to the back of th e
drawer as shown in the picture to t he
right.
Select the long or short L-brackets (DS or DL) to fit your cabinet’s 19” rail
distance. Make sure they can slide by an a dditional 14cm without falling off. Insert
the appropriate L-bracket (DS or DL) i nto the inner slider bracket (C) and fix it with
the central screw, ensuring the br ackets cannot fall off each other when slid. Ne xt,
adjust the inner (C) to the outer (B) sli der bracket using one central screw in the
appropriate position. Make sure it can slide over the necessary distance of 14cm.
Long Rear brackets with shortest L-bracket installed
Long Rear brackets with long L-bracket installed and pulled out
Central Screws to fix brackets
DS DL