User manual 15” & 17” LCD Terminals
3
• The LINDY LCD Terminal is designe d for use in standard 60cm to 120cm
depth, 19” cabinets. It requires a m ounting depth of at least 50cm and a
distance between front and rear 19 ” rails of at least 43cm.
• The complete drawer can be fully slid i n and out of the rack.
• It also offers the option to pull out the LCD tray only and flip it up so that the
screen can be viewed while the ke yboard is hidden, and the cabinet doors
are closed and locked.
• 15” 1024 x 768 Active Matrix TFT LCD Screen with support for VGA, SVGA
and XGA
OR
• 17” 1280 x 1024 Active Matrix TFT LC D Screen with support for VGA,
SVGA, XGA and SXGA. Also supports SUN resolution of 1152x900
• Built-in 5 language OSD for display adjustment
• Backlight lifetime of 50,000 hours
• PS/2 touch pad
• PS/2 keyboard and separate numeric keypad
• 100-240V AC wide range power s upply
• Dimensions: 450/485 x 460 x44mm (WxDxH)
• Weight approx. 15kg, 17kg with packaging
• Environmental Specification – For i ndoor use only :
o Temperature: 5 ~ 40° C (Op erating) 1~50° C (Storage)
o Relative Hum idity: 10~90%, Non-Condensing
Installing the drawer into a 19” cabinet
Important note:
Because the complete
drawer provides the option to slide the
LCD screen out of the rack, allowi ng it to
be flipped up, you have to mak e sure that
the rear brackets:
1) can be sli d over a distance up to 14cm
2) do not come apart from each other
when slid out 14cm
Please measure the distance bet ween front and rear 19” rails of your cabinet and
select the appropriate rear brackets.
Distance between
19“ rails