Lindy 25008 manual Port Mirroring Configuration

Models: 25008

1 18
Download 18 pages 14.37 Kb
Page 14
Image 14
7.5Port Mirroring Configuration

The following Figure. shows a sample of Trunking Configuration screen after some trunking ports are defined.

!!!!!!!!!!!!!!!!!!!!UsvolTheMjtuDvssfouMjolBhhsfhbft!!!!!!!trunked234!!!Qps35group!!!!!!!!!!!!!qpsu!DpvouQpOvncfscan!!!!!!!!Vtfalso!bsspx>>>>>>>>>>>>!Tnbbe!selectedlfzt!=!S64523Txjudi;!Qpsu!Usvoljoh!Dpogjhvsbujpo!Efm!up!fuvso!?!9fusvol2!tfujoh/!pnpwf/!=Fofor deletionu.fs?!up!dpogjsn/!To delete a trunk, simply use arrow keys & move and press Enter to

select. The following question will appear at the status line: Are you sure you want to perform this operation? (y/n) Press Y will delete selected trunk group.

Note: You can’t assign 2 of different switch’s ports to the same VLAN group.

Note: Members in trunk should be in the same VLAN

7.5Port Mirroring Configuration

Port Mirroring means setting up a monitored port so that data flowing through that port is copied to the 8th port. The port used to monitor other ports is called the Monitoring port. It is fixed at 8th port. The ports being watched are called the Mirrored Port.

The Smart Switch is able to monitor one port at one time. The transmitting and receiving direction can be monitored exclusively. Be sure to activate this function before setting port selection and direction.

!!!!!!!!!!!!!!!!The following+++Opu;+++UiftqfitemsVtf!!!!!!!!!!!!!!epgnpojupsfeqpsunvtuareNpojupsfebsspxavailableTnbsu!Txjudi!;Njssps!Qpsu!Dpogjhvsbujpo!lfzt>>>>>>>>>>>>>!!.........................Qpsu2SyQbdlft!forup!Port;!!!npwf/Uzqf!!!!Bdjwf!!Mirrowing=!Sfuvso!?!=Foufs?ibwf!Ejtbcmfe!configuration!uif!tqfe!t!9(ui!qpsu/!p!nbl!dib.ohft/!

item

selections

explanation

Port

1-7

Port to be Monitored

Type

Rx Packets

Transmit or Receive direction to be monitored.

 

Tx Packets

 

Active

Disabled

Disable/Enable Monitor function of 8th port.

 

Enabled

 

For using Mirror function, some limitations should be noted here.

The monitored and monitoring port should be running in the same speed.

￿The transmitting or receiving rate of monitored port should not exceed the wire speed of the 8th port (monitoring port).

14

Page 14
Image 14
Lindy 25008 manual Port Mirroring Configuration