Lindy 25008 manual The Rear Panel, 10M/100M

2.3.3Status LEDs

The Switch comes with a complete range of LEDs. The table below lists each LEDs name, color and a brief description of its function.

Name	Color	Function
Power	Green	Power on, normal operation
	Off	Power off
Link/Act	Green	Link On
	Blink	Activity
	Off	Link Off
1000M	Green	1000M Speed
	Off	Not 1000M Speed
10M/100M	Green	100M Speed
	Off	10M speed
Full	Green	Full-duplex mode
Collision	Blinking	Collision
Half	Off	Half-duplex mode

2.4The Rear Panel

Gigabit Ethernet Switch (19 inches case)

2.4.1Power Socket

The Power Socket is designed to be used with the power cord included in the product package. Attach the female end of the power cord to the male power connector on the back panel.

￿Attach the male end of the power cord to a grounded power outlet.

2.4.2Network Ports

The Switch provides Eight (8) 10BASE-T/100BASE-TX/1000BASE-T (RJ-45 connector) ports.

2.4.3Console Port

The console port interface conforms to the RS-232 electrical specification. This interface supports asynchronous data of Eight

(8) data bits, One (1) stop bit, and no parity bit. The unit only operates at 38400bps rates with RS-232 cable in system configure.

5