Lindy 25008 manual VLAN Configuration

7.6VLAN Configuration

The VLAN Configuration sets up the VLAN configuration of this switch. The Switch supports 32 VLANs in four pages. Each VLAN can have an ID with range 1-4094, 0 and 4095 are standard reservation. Member set in the same VLAN can be untagged or tagged. Incoming untagged packet will be assigned Port VID of that port. Following is the configuration screen for VLAN function.

Each VLAN hasWMBO23456789!23456789!2a VLANVtfbs=Sfvo?!!=Bee?Qsfwjpvt!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!QpsuNfncfsTfuoubhTfIDTnbsuTxjudi;WMBOUbcmf)2p9*!>>>>>>>>>>>>>!>>>>>>>>>>>>>!TnbsuandpxlfztQQQQQQQQaNpegzifWMBOhspvq/list6789!ofpnpwf/members=Foufs?!up!dpogjsn/!. ForVVVVVVVVeachQbhf?!=Ofyu!Qbhf?!VLAN, a letterTTubujd!V!;!is QWJE!Voubh!used for specific port to represent the relation of

that port to the VLAN.

Initially all ports are PVIDQpsuNfncfsTfu1. To add ajunew VLAN, pressVoubhTfu!the <Add> Command. The following screen appears:

!!!!!!!!!!!!!!!To add a new VLAN,WMBO2345Vtf!bsspx1!!!=Pl?!!!!!!!!!!!!!!!!!!!!!!!!!!!=Dbodfm?!!!!!input the!lfztnew!TxupVLAN!npwf/di;BEEWMBO!ID,!=Foufs?edit the23456789!!upmember!nblf!dibohft/!set!!!!!!!!and untagTTubujd!QQWJE!V!;!setVoubh!of this VLAN. Press <OK> to complete this

setting.

When you want to modify existed VLAN configuration, just press <enter> when cursor is on that VLAN. Display will enter Modify VLAN. Here user can use arrow key to move to target position that needs to be modified. VLAN can only be deleted at this moment. A confirmation message appears on status bar. Press <Y/N> to complete process.

Move to <Config> and press <enter> activates the new VLAN setting and stays in this screen. Move to <Return> and press <enter> completes modification and returns to the VLAN Configuration screen.

15