Software Installation, CD Drive Letter\usb\setup.exe | Lindy 25121

Manual

Software Installation

Note: Windows may look different on other platforms!

1.Do not connect the HomePlug USB Adaptor to your computer yet! Insert the CD into your CD-ROM drive. If the CD doesn’t automatically load, run -

<CD Drive Letter>:\usb\setup.exe

Click on ‘Next’ to start the installation

2.Enter a User Name and Organisation, and select either ‘Anyone who uses this computer’ or ‘Only for me’, according to your preference.

Click ‘Next’ to continue.

3.Review or change your installation settings, then click ‘Install’.

LINDY HomePlug USB Adaptor

Page 4

Image 4

$Lindy 25121 user manual Software Installation, CD Drive Letter\usb\setup.exe$

Contents

HomePlug USB Adaptor Introduction About Lindy HomePlug devices Understanding HomePlug Encryption and Security Basic requirements for setting up a HomePlug networkSupplied Items Lindy Part No Software Installation CD Drive Letter\usb\setup.exe HomePlug USB Adaptor’ on page 7 Click ‘OK’ to continue Start Settings Network Connections Connecting the HomePlug USB Adaptor Front View Rear View HomePlug Configuration Utility Network section MAC AddressData Rate Scan HomePlug Security section All of the HomePlug devices on the network Remote Passwords Device PasswordAdvanced section Add Setting the network password Manual Manual Radio Frequency Energy