User Manual | English |
12.Use the supplied screws to secure both sides of the drive
13.Carefully assemble the top and bottom of the case. If the upper case does not fit properly, adjust the hard disk position and try again
14.Replace the 4 case screws and affix the two foam feet as illustrated
15.Connect the Power Cable to the NAS Enclosure and the mains power supply. Now connect the Ethernet cable to the NAS Enclosure and your PC using the RJ45 ports
If you are intending to use the NAS Enclosure using a direct connection to your Mac Mini or PC then use the USB cable to connect the Enclosure
4
