User Manual | English |
3.Password Change
In the Administration mode, you can choose your own password for entering the setup mode. Now you are ready to connect the NAS Enclosure to your Network.
Please Note:
After changing the password you will be logged off and then be prompted to log in using your new password.
4.Connect the NAS Enclosure Via Ethernet.
Connect an Ethernet cable to the Ethernet port of your NAS Enclosure. Connect the other end of the Ethernet cable to your Network Router.
Switch on your NAS Enclosure; it may take a few second for your network to recognise the NAS Enclosure.
Important Information:
Make sure that the computer you will be using to configure the NAS Enclosure is on the same network (or same subnet) as the NAS Enclosure.
6