28CHAPTER 3: BASIC TELEPHONE OPERATION

User Interface (TUI) and change the local password to match the password stored on the call processor by following these steps:

1Press the bottom right soft button (Advanced Settings) + 5.

The Display Panel shows:

Enter Password:

2Enter your new password and press #.

The VCX call processor periodically communicates with each VCX telephone. If you change your password through the VCX User Interface but do not change it through the TUI, the VCX call processor detects a password mismatch and logs you out. If this happens, follow steps 1 and 2 to log in.

Answering a Call To answer an incoming call, lift the handset.

Alternatively, you can press the Speaker button. If you have enabled Handsfree Active on Intercom, you can simply speak to answer internal calls.

If your phone includes multiple access lines, press the Access button for the line on which the new call is arriving (the light next to the button will be flashing).

If you have multiple calls, press the left line soft button for the line on which the new call is arriving.

The Display Panel can display up to ten active calls, but only three can be visible on the display. To access active calls that are not visible, use the scroll down button. If the Display Panel contains ten active calls and you have a new incoming call, it is forwarded to your voicemail.

Unanswered calls are sent to either your call coverage point which, by default, is your voice mailbox or your configured call forwarding destination. See Configuring a Call Coverage Point or Call Forwarding.

Page 28
Image 28
3Com VCX V7000 IP manual Enter Password