Logging In to Your Telephone | 27 |
If the password you entered is associated with the phone extension, you are logged in.
If the Display Panel alternately shows the following information, the password you entered is not associated with the phone extension or the extension has not yet been assigned to the phone:
Invalid number/password:
Then:
Unable to contact PBX
Logged out from PBX
In this case, use the following steps to log in to your phone:
1Press the bottom right soft button (Advanced Settings) + 4.
The Display Panel shows:
Local Phone Number:
2Enter your extension and press #.
If the Display Panel shows a previously assigned number that you want to replace, press the Delete button under the Display Panel to move the cursor back one space. Repeat as necessary and then enter your extension and press #.
The Display Panel shows:
Enter Password:
3Enter your password and press #.
Alternatively to set a password locally, you can use the Password Stored Locally feature code (434) by entering the bottom right soft button (Advanced Settings) + 5, then enter the password. You can use this method in place of step 1 above. See Chapter 4 for information on feature codes.
Changing Your You can change your password through the VCX User Interface (see Password Chapter 6). This changes your password on the VCX call processor.
However, your password is also stored locally on your telephone. Changing your password through the VCX User Interface does not change the password stored on the phone. You must use the Telephone