Lindy 70536 user manual What Is RAID, Package Contents, USB Interface, Disk Striping RAID

Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives.

Fully compliant with Serial ATA 1.0 specifications.

Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes.

Supports Spread Spectrum in receiver.

Features Serial ATA to PCI interrupt masking.

Features Watch Dog Timer for fault resiliency.

1.1.3. USB Interface

Provides three USB2.0 / USB1.1 ports ( 3 External + 2 Internal).

Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps).

Compliant with Open Host Controller Interface Specification for USB Rev 1.0a.

Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95, All USB ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction.

1.2. Package Contents

Low Profile PCI Combo Host Adapter

This User’s Manual

Driver Diskette

2. What Is RAID

RAID - Redundant Array of Independent Disks

RAID technology manages multiple disk drives to enhance I/O performance and provide redundancy in order to withstand the failure of any individual member, without loss of data. This card provides two RAID Set types, Striped (RAID 0) and Mirrored (RAID 1).

Disk Striping (RAID 0)

Striping is a performance-oriented, non-redundant data mapping technique. While Striping is discussed as a RAID Set type, it is actually does not provide fault tolerance. With modern SATA bus mastering technology, multiple I/O operations can be done in parallel, enhancing performance. Striping arrays use multiple disks to form a larger virtual disk.

- 3 -