installing the driver.
13.The wizard will now copy the required files to the system and start the Driver. After starting the driver the wizard will display a completion dialog, click 'Finish' to exit the wizard.
4.3. Windows XP installation
1.Power off the system. Insert Combo Card into an available PCI slot. Power up the system.
2.During OS boot up, Windows will display the 'Found New Hardware Wizard'. 'Universal Serial Bus (USB) controller'.
3.Select 'Install the software automatically (Recommended)' and insert diskette driver into Floppy disk drives. And click 'Next'.
4.If the 'Hardware Installation' dialog appears, click 'Continue Anyway'.
5.The wizard will now copy the required files to the system and start the Driver. After starting the driver the wizard will display a completion Dialog, click 'Finish' to exit the wizard.
6.Windows will display the 'Found New Hardware Wizard'. 'Mass Storage Controller'.
7.Select 'Install the software automatically (Recommended)'. Click 'Next'.
8.If the 'Hardware Installation' dialog appears, click 'Continue Anyway'.
9.The wizard will now copy the required files to the system and start the Driver. After starting the driver the wizard will display a completion Dialog, click 'Finish' to exit the wizard.
4.4.Verifying The installation under Windows 2000 and XP
Follow the instructions in this section to verify that the controller was installed correctly.
1.Right click on 'My Computer' icon, select 'Properties', left click on 'Hardware' tab, and then on 'Device Manager' button.
2.Double click on 'System devices', then left click on 'PCI standard
3.Double click 'Universal Serial Bus Controllers', If there is no yellow '!' or '?' in front of
NEC PCI to USB Enhanced Host Controller NEC PCI to USB Open Host controller NEC PCI to USB Open Host controller USB Root Hub
- 7 -
