Lindy 70928 IBM Thinkpad Socket and Card Services, Netware DOS ODI Driver, Packet Driver

User Manual

IBM Thinkpad Socket and Card Services V2.12

DEVICE=C\EMM386.EXE NOEMS I=B000-B7FF X=C800-CFFF X=D000-DFFF DEVICE=C:\THINKPAD\IBMDSS01.SYS /D

DEVICE=C:\THINKPAD\IBMDOSCS.SYS DEVICE=C:\THINKPAD\DICRMU01.SYS /MA=C800-DFFF DEVICE=C:\THINKPAD\$ICPMDOS.SYS DEVICE=ENABLE.EXE

Netware DOS ODI Driver

The DOS ODI driver for Netware 3.x and 4.x network operating systems is located in the ODI directory of the driver diskette. The filename is CARDODI.COM. To install this ODI driver, there is a batch file called STARTNET.BAT which is located in the same directory. There are five files needed to install the DOS ODI driver; they are:

1.LSL.COM----- Supported by Novell

2.CARDODI.COM----- ODI driver, supported by this product

3.IPXODI.COM----- Supported by Novell

4.NETX.EXE----- Supported by Novell or EMSNETX.EXE or XMSNETX.EXE

5.NET.CFG----- Configuration File

The NET.CFG file is used to decide the configuration of the Ethernet Card. The following statements are the sample contents in NET.CFG. If you have any problem with these settings, check your Netware Operating System user manual.

Protocol

bind CARDODI

Link Driver CARDODI int 5

port 300

frame Ethernet_802.2 frame Ethernet_802.3 frame Ethernet_II frame Ethernet_snap protocol IPX 0 Ethernet_802.3

Packet Driver

To use FTP PC/TCP or NCSA Telnet utilities, a packet driver for the network adapter is needed. This product supports a packet driver called CARDPD.COM. To load this packet driver, just execute the following command:

CARDPD 0x60

For detailed syntax, refer to the README.TXT on the driver diskette.

5