Manuals / Lindy / Computer Equipment / Network Card

Lindy 70928 user manual Setup for Windows XP, User Manual

Models: 70928

1 19

Download 19 pages 13.05 Kb

Page 17

Image 17

User Manual

Setup for Windows XP

1.Make sure your PC is powered on and booted into Windows.

2.Insert the Ethernet Card into a spare PCMCIA slot in your PC. Windows XP will recognize the device. The "Found New Hardware Wizard" will be displayed. Select "Install the software automatically (Recommended) " and insert the driver disk and click "Next".

3. Select the XP driver from the and click "Next".

Page 17

Image 17

Lindy 70928 user manual Setup for Windows XP, User Manual

Contents

LINDY No EnglishPCMCIA 10Base-T/2 Ethernet Adapter Page Contents Package Contents FeaturesUser Manual IntroductionSetup for DOS/Windows Installing the Ethernet CardDiagnostics User ManualPhoenix PCM+ User ManualSystemSoft CardSoft Award CardwareNetware DOS ODI Driver IBM Thinkpad Socket and Card ServicesProtocol bind CARDODI Link Driver CARDODI int port Packet DriverUser Manual Setup for Windows 95/981. Make sure the PC is powered on and booted into Windows 4. Select Floppy disk drives or select Specify a location and type A\WIN98 in the location. Click Next User Manual7. Windows may request you to Insert Windows 98 CD-ROM into the drive selected, and click OK. Follow the instructions and insert your Windows CD-ROM or disks as needed, and then click OK User ManualFollow the procedure below to get up and running Setup for Windows NTUser Manual 1. Insert the Ethernet Card in your computer 2. Start the computerUser Manual User Manual 9. Ask your Windows NT Server administrator to set the IP AddressUser Manual Setup for Windows1. Make sure your PC is powered on and booted into Windows User Manual User Manual Setup for Windows MEUser Manual Setup for Windows XPUser Manual 4. The system will state that the driver has not passed Windows logo testing. Click Continue Anyway. Windows will automatically copy the relevant driver files