F1 - Display firmware first digit (Note: F1 is )followed by NOT O)
F2 - Display firmware second digit
F3 - Display firmware third digit
F5 - Restore PS/2 mouse function to the currently selected CPU’s mouse port F6 - Restore IntelliMouse function to the currently selected CPU’s mouse port
F8 - Reset all configurations to factory default settings. An ‘r’ will show briefly on the display to confirm that the reset has been completed.
4.7 Setting a security password
There are many situations where unrestricted access to corporate file servers or sensitive information needs to be controlled. In such circumstances, the LINDY CPU Switch Smart can be locked away in a room or secure cabinet and controlled remotely. In this mode typing the keyboard hotkeys together with 'L'illwblank the screen, disconnect the keyboard and mouse from all of the computers and display ‘P’ on the LINDY CPU Switch Smart display. Control can only be regained by typing the correct password on the keyboard.
To set the password in configure mode, first type ‘P’ then (return). The display on LINDY CPU Switch Smart will change to show ‘=' and you can then type your password. The password is not case sensitive and can be any combination of key strokes, including the function keys, but excluding the (ctrl), (alt), (shift) and (return) keys. When you have typed in your password type (return) to register it in the stored memory. Do not worry if you type the password incorrectly, you can always
NOTE - The password consists of a combination of key strokes rather like the code to a safe. The key strokes are not case sensitive and can include all the keys on the keyboard (except ctrl, alt, shift and enter). Consequently the following 'password' would be valid:
R)5('J
LINDY CPU Switch Smart | Installation and Use | Page 35 |
