Beltpack Transmitter
6
BATT
AUDIO
3 | MUTE | OFF/ON | 1 |
AUDIO | BATT |
8
7
4 5 2
N222
ID: UOB916TBP12 | 008WWA090153 |
FCC IC: |
|
Pat. Pending Made in China Designed in U.S.A. | |
1.ON / OFF Switch
2.
3.MUTE Switch
4.SELECT
5.VALUE
6.Battery & Audio Status LEDs – Battery LED is blue when good, red when low, flashing when very low; Audio LED is green for audio signal and red for clipping.
7.LCD Display Panel – Backlight will light briefly when transmitter is turned on and when changing pages; will stay lit when muted; display also functions as programming window.
8.Belt Clip – Can remove the center mounting screw to reposition or remove, as necessary.
Open the battery door on the side of the beltpack and insert two AA batteries. Slide the ON/OFF switch to turn on. Press and hold the SELECT button for two seconds, and CH and a flashing channel number will appear on the LCD screen. Press the VALUE button repeatedly in order to change the channel number to match the receiver. Press and hold the SELECT button for two seconds to select and return to the main screen. The transmitter is ready to use.
7
