XD-V75 Digital Wireless Quick Setup
Receiver
1 | 2 |
|
|
|
|
|
| 3 |
| 4 | 5 |
| |
|
|
|
| |||
ANTENNA A | A OUT | MAIN OUTS |
|
| B OUT | ANTENNA B |
|
|
| ||||
|
|
|
|
| USB |
|
|
| UNBAL | BALANCED | 9VDC IN |
|
|
AUDIO | BATTERY | RF | PUSH TO SET | ||||
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CH 1:THH12
8:00
| TRANSMITTER | XD- |
|
|
|
MUTE | STATUS |
|
|
| |
|
| 2.4GHz DIGITAL WIRELESS SYSTEM |
|
|
|
| 6 | 7 | 8 | 9 | 10 |
1.Antenna A & B Input Connectors (BNC)
2.Antenna A & B Output Connectors (BNC) – to
3.Unbalanced
4.9VDC Power Input Connector
5.USB Connector – for firmware updates
6.Transmitter Status LED Displays
AUDIO – lights green to indicate audio signal level, top clip LED lights red to indicate the audio is clipping
MUTE – lights red when transmitter is muted
BATTERY – lights green, with all lit indicating full transmitter battery; bottom LED turns red when 1 hour remains, and flashes red when less than 40 minutes remains
RF – lights green to indicate transmitter signal strength/quality; with transmitter off, red lights indicate interference on that channel
7.LCD Display Panel – main page shows channel, transmitter, battery life, and antenna strength; display also functions as programming window
8.Edit / Push to Set ROTARY ENCODER – used to change and set receiver parameters
9.Setup Button / Exit Button – used to access setup menus; EXIT returns to main display page; these buttons are used along with the ROTARY ENCODER
10.Receiver Power Switch
Plug the power supply cable into the receiver and AC power, and connect the antennas. Turn on the receiver, press the SETUP button, and with the ROTARY ENCODER scroll to SET CHANNEL and press to select. Scroll to the desired channel and press to select. Press EXIT. Connect with an audio cable to a mixer or similar. The receiver is ready to use.
6