![](/images/new-backgrounds/1329657/3296573x1.webp)
Contents |
|
Contents | 2 |
Introduction | 2 |
Operation | 2 |
Database Overview | 2 |
System Features | 3 |
Programming with a Computer | 4 |
Setting up Multiple Units | 5 |
Programming Over the Telephone | 6 |
Programming from the Local Keypad | 6 |
Programming Reference | 7 |
Factory Settings | 7 |
Programming Notes | 7 |
Resident Data Programming | 8 |
Entry Code Programming | 9 |
Wireless Transmitter Programming | 10 |
Wireless Transmitter Programming (Continued) | 11 |
System Options | 12 |
System Options (Continued) | 13 |
System Utilities | 14 |
15 | |
Troubleshooting | 16 |
Linear Limited Warranty | 16 |
Introduction
The Model
Housed in a locked, rugged stainless steel faced enclosure, the
The two relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates. The system utilizes
The system can be programmed locally using the keypad, remotely with a touch tone telephone, or remotely using a computer equipped with a modem and a web browser.
Operation
In a typical installation, the unit’s memory would be programmed with each resident’s name and directory code number. Arriving visitors would use the keypad on the
In addition to the telephone entry, the
Database Overview
Programming the
Resident Data
Up to 250 resident names and telephone numbers can be set. Each resident entry is assigned a directory number. Directory numbers can be from two to four digits in length (all will be the same length).The directory number is the number a visitor would enter to have the system call the resident.
RESIDENT DATA (UP TO 250 RESIDENTS)
FOR EACH RESIDENT: DIRECTORY NUMBER (2 TO 4 DIGITS)
NAME (UP TO 16 CHARACTERS)
PHONE # (UP TO 12 DIGITS)
Entry Code Data
An entry code is a number entered at the
Entry codes can be programmed for timed or toggle operation. Timed relays activate for a programmed length of time. Toggle relays latch on until the next time a toggle entry code is entered, then the relay unlatches. Each entry code can also be set for a limited or unlimited number of uses.
An entry code will activate Relay Channel “A” or “B” depending on how the entry code is programmed and whether or not a remote keypad is attached:
•When an entry code is programmed to activate a specifi c relay, the selected relay will activate when the code is entered on either the
•When an entry code is programmed to activate both relays, and a remote keypad is attached, Relay Channel “A” will activate if the entry code is entered on the
•When an entry code is programmed to activate both relays, and a remote keypad is not attached, the entry code will activate both Relay Channels “A” and “B”.
When an entry code is programmed to activate both relays, only timed relay mode is available for that code, toggle relay mode is unavailable.
ENTRY CODE DATA (UP TO 500 CODES)
FOR EACH CODE: ENTRY CODE (2 TO 6 DIGITS)
RELAY SELECTOR
TEMPORARY USAGE COUNT
Transmitter Data
Up to 1000 wireless transmitters can be used with the system. Up to 500 transmitters can be ordered in
TRANSMITTER DATA (UP TO 1000 TRANSMITTERS)
FOR EACH TRANSMITTER: TRANSMITTER ID #
OPTIONAL FACILITY CODE
2