8 Local Programming Functions (Continued)
Function 20: PBX Dialing Digit
(AE1000Plus and AE2000Plus Only)
A PBX Dialing Digit can be programmed using this function (the default is none). This digit plus a four second delay will be added before the telephone number being dialed. Entering 10 removes the PBX Dialing Digit.
PBX DIALING DIGIT | FCN 20 |
20#VALUE#
VALUE = DIALING DIGIT 0 - 910 = NONE
FACTORY SETTING: NONEFunction 21: Enter Directory Codes
(AE1000Plus and AE2000Plus Only)
Directory codes can be entered using this function. If the directory code entered already exists in the database, the fi rmware will reject the code and provide an error beep feedback.
To enter the name information, the keypad is defi ned for the various alphabetic entries shown in the diagram to the right.
The fi rst time the key is pressed, the fi rst letter is selected. Each press afterward will select the next letter. On the fourth press of the same key, the number will be selected. When the required value is reached, press another key for another letter, or wait three seconds (a beep will sound) to advance to the next letter.
ENTER DIRECTORY CODES | FCN 21 |
21#DIR CODE#LAST#FIRST#PHONE#
DIR CODE = DIRECTORY CODE TO SETLAST = RESIDENT'S LAST NAMEFIRST = RESIDENT'S FIRST NAMEPHONE = RESIDENT'S PHONE NUMBERKEYPAD ALPHANUMERIC ENTRY
(FOR PROGRAMMING STEPS REQUIRING TEXT)
The fi rst letter of each word will be capitalized. To capitalize all of the letters entered, begin with the “#” key.
m n o
j k l
v w x
s t u 
backspace or erase entire line
g h i
p q r |
y z , |
finish entry
Function 23: Delete Directory Code
(AE1000Plus & AE2000Plus Only)Directory codes can be deleted using this function. For the AE1000Plus and AE2000Plus, enter the directory code to be deleted. The fi rst line will show “Code: xxx” where “xxx” is the code entered. The second line will display the tenant’s name. Enter the code the second time to delete the code.
DELETE DIRECTORY CODE | FCN 23 |
23#CODE#CODE#
CODE = THE RESIDENT'S DIRECTORY CODETO DELETE
4
