Link electronic Door phone manual Relay

nn– telephone number up to 16 digits to be stored. Refer to the table for other choices.

The number stored in parameter 2 is the number for the second group or the number for Night mode

Note: The switchover to Day/Night mode remains set in the unit even after line disconnection.

parameter	choice
0 - 9	0 - 9
#	#
∗	∗∗
Recall	∗ #
Pause	∗ 0

5.2 Relay

Parameter		Value	Description	Default	Exam.1	Exam.2
31		r m	Relay mode	1	1	2
m –	relay mode [ 1-2]
m=1	relay mode – relay will close on command or password for ss period (used for electrical locks, gate
	opening, etc.)

m=2 button mode – (activated by button press e.g. external bell).

Parameter	Value	Description	Default	Exam.1	Exam.2
32	r hhhhhh	External access code in	-	1212	1324
		DAY + NIGHT mode
33	r hhhhhh	External access code in	-	2211	2211
		DAY mode
34	r hhhhhh	External access code in	-	1122	1122
		NIGHT mode

hhhhhh– password for relay closing from buttons [2 to 6 digits]

The 3 passwords are controlled by Day/Night; the combination is entered using the unit buttons. It is influenced by the setting of Relay mode and Day/Night switchover. When set to 2-group mode the unit is permanently in DAY mode.

Follow these rules when choosing password combination:

ƒSelect passwords carefully, to prevent their discovery from wear on buttons caused by frequent use.

ƒSelect the first password button from infrequently-used buttons for direct dialling (-extends choice

time)(-not valid for keyboard).

Note: The switchover to Day/Night mode remains set in unit even after line disconnection.

Parameter	Value	Description	Default	Exam.1	Exam.2
35	aa	Internal access code	55	55	55

aa– command from phone to relay closing [2 digits]

It is recommended to set the same command for Internal Access Code and End Call (parameter 43) aa=bb.

Parametr		Value	Description	Default		Exam.1	Exam.2
36		ss	Relay closing time	05	02		05
ss –	duration of relay closing [2 digits 01-99]

11