1. Basic description
1.1 Features
¾Very slim module for surface mounting only. Supplied in 1, 2 or 4 button variants.
¾Voice communication powered from analogue telephone line only.
¾Pulse and tone (DTMF) dial
¾Two 16 digits numbers saved under each button (includes *, #, RECALL and pause)
¾DAY/NIGHT mode
¾Call prolongation by dialling * or #
¾Electrical (magnetic) lock compatible
¾Code to hang up from phone
¾Code to open the door by phone
¾3 different passwords for code lock (external code from buttons)
¾Optional number of rings before picking up incoming call
¾Optional time between code entry
¾Optional delay time before redialling
¾Optional time before dialling starts
¾Optional parameters for DTMF tones, Recall and Pause duration
¾3 default levels
¾Programming by remote control (DTMF) and by direct PC connection via USB cable (available separately)
¾Integrated heating of printed circuit (PCB) (option)
¾Permanent lighting through visiting cards (option)
¾Earthing outlet for better protection against static electricity
¾Switchable audible confirmation tones
1.2 SlimDoorPhone models
Three versions are available :
1 button | 2 buttons | 4 buttons |
2 Installation
This compact unit is fixed by 2 screws to the wall.
2.1Opening, wiring, wall mounting and settings
2.1.1Name card panel
1.Every unit is supplied with a special key which is used to release the name cards on the front panel. Push the key into the hole in the speaker grille
(see figure - 1).
2.Push the name card panel down and then push it towards to grille (see
3.The panel will be released. Pull it towards you to remove (see figure – 3).
3
