Linksys 10/100 - page 10

EtherFast

10/100 LANCards

11. Click on the Identification tab and the following window will appear.

Type the name of your computer in the Computer Name box. Choose a

name that is unique from the other computer names on the network.

12. Type the name of your workgroupin the Workgroupbox. The Workgroup

name should be the same Workgroup Name in use by all of the other PCs

on the network. Use the same Workgroup Name that is in use on your other

computers. Do not click OKwhen you have completed these fields.

13. Enter a description of your computerin the Computer Description box.

This box is optional. Do not click the OKbutton when you have complet-

ed these fields.

NNoottee:: Your

Computer Name

and

Workgroup Name

must

both be fewer than 15 charac-

ters, and should only consist

of numbers and letters.

Linksys Instant EtherFast

Series

6. After making sure that all of the listed network components are installed

on your system, verify that Client for Microsoft Networksis listed in the

Primary Network Logonbox.

7. Under Network Components, select Linksys LNE100TX (v5)Fast Ethernet

Adapter, and click the Properties button. A screen similar to that below

will appear.

8. Select the Driver Typetab and make sure that Enhanced Mode (32 bit

and 16 bit) NDISDriver is selected.

9. The Bindings tab will show you what network protocols are presently uti-

lized by the card. There is no need to modify any setting on this tab.

10. The AdvancedTab has two settings. First, is the Media Typesetting. This

should be set at AutoSense. The next setting, Select Media, should be set

at Ethernet.