Linksys 10/100 - page 34

11. Remove all devices with the name Linksys in its description. (If at any point
you are asked to restart the computer, Click No).
12. Scroll down to the Other Deviceslisting. Click the plus [+] sign. Remove
PCI Ethernet Controlleror PCI Ethernet Adapter. (If Other Devices is not
listed, proceed to the next step.)
13. Click the Close button, shut down Windows, and restart your computer.
14. After your computer has restarted, refer to the chapters for Windows 95 or
Windows 98 and follow the setup instructions.
Starting Over in Windows 2000
1. Click the Startbutton, choose Settings, choose Control Panel, then double-
click the System icon. The System Properties window will open.
2. Choose the Hardware tab.
3. Click the Device Manager button. The Device Manager window will open.
4. Click the plus sign (+) beside Network Adapters. The LNE100TX Fast
Ethernet Adapter listing should appear.
62
Linksys Instant EtherFast
®
Series
61
EtherFast
®
10/100 LANCards
5. For PCs with Dial-Up Networking and/or an AOL adapter, remove any
instance of the name Linksys, all IPX/SPX protocols, all NetBEUI, all
Clients, and File and Printer Sharing for Microsoft Networks. Do not
remove Dial-Up Adapter, A OL Adapter, TCP/IP-Compatible Protocol-A OL
Adapter or TCP/IP-Compatible Protocol-Dial-Up Adapter.
6. When you have completed the removal of all unnecessary components,
click OK. When asked to restart, click No.
7. Return to the Windows Control Panel. Double-click on the SystemIcon.
The System Properties window will appear. Click on the Device Manager
Tab.
8. Scroll down to the Network Adapterslisting and expand it by clicking on
the plus [+] sign.