Installing the Battery

You must install and charge the battery before you can use the Cisco Wireless IP Phone 7920. To install or remove the battery, follow these steps.

1.To install the battery, insert the battery catches (as shown in Figure 1-1) in the corresponding slots at the bottom of the Cisco Wireless

IP Phone 7920. Make sure that the metal contacts on the battery and the phone are facing each other.

2.Press the battery to the body of the phone until it locks into place.

3.To remove the battery, press down on the locking catch, then lift and remove the battery.

10

78-14564-03

Page 16
Image 16
Linksys 7920 warranty Installing the Battery