Linksys AG041 (EU) manual My DSL service’s PPPoE is always disconnecting

ADSL Gateway with 4-Port Switch

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

•Perform the upgrade using the TFTP program or the Gateway’s web-based utility through its Administration tab.

14.My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet.

•There is a setup option to “keep alive” the connection. This may not always work, so you may need to re- establish connection periodically.

1.To connect to the Gateway, go to the web browser, and enter http://192.168.1.1 or the IP address of the Gateway.

2.Enter the username and password, if asked. (The default username and password is admin.)

3.On the Setup screen, select the option Keep Alive, and set the Redial Period option at 20 (seconds).

4.Click the Save Settings button. Click the Status tab, and click the Connect button.

5.You may see the login status display as Connecting. Press the F5 key to refresh the screen, until you see the login status display as Connected.

6.Click the Save Settings button to continue.

•If the connection is lost again, follow steps 1- 6 to re-establish connection.

15.I can’t access my e-mail, web, or VPN, or I am getting corrupted data from the Internet. The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set automatically.

•If you are having some difficulties, perform the following steps:

1.To connect to the Gateway, go to the web browser, and enter http://192.168.1.1 or the IP address of the Gateway.

2.Enter the username and password, if asked. (The default username and password is admin.)

3.Look for the MTU option, and select Manual. In the Size field, enter 1492.

4.Click the Save Settings button to continue.

•If your difficulties continue, change the Size to different values. Try this list of values, one value at a time, in this order, until your problem is solved:

1462

1400

1362

1300

Appendix A: Troubleshooting 46

Common Problems and Solutions