ADSL Gateway with 4-Port Switch
RFC 2364 PPPoA
Some
ISP uses a PPPoA, enable PPPoA.
•User Name and Password. Enter the User Name and Password provided by your ISP.
•Connect on Demand: Max Idle Time. You can configure the Gateway to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Gateway to automatically
•Keep Alive Option: Redial Period. If you select this option, the Gateway will periodically check your Internet connection. If you are disconnected, then the Gateway will automatically
specify how often you want the Gateway to check the Internet connection. The default Redial Period is 30 | Figure |
seconds. |
|
When finished making your changes on this tab, click the Save Settings button to save these changes, or |
|
click the Cancel Changes button to undo your changes. |
|
Bridged Mode Only
If you are using your Gateway as a bridge, which makes the Gateway act like a standalone modem, select
Bridged Mode Only. All NAT and routing is disabled in this mode.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.
Figure 5-8: Internet Setup - Bridged Mode Only
NAT: translates IP addresses of a local area network to a different IP address for the Internet
Chapter 5: Configuring the ADSL Gateway | 17 |
The Setup Tab