Raymarine C90w Fishfinder display modes, Selecting a fishfinder preset, Fishfinder zoom mode

Selecting a fishfinder preset

From the fishfinder main screen:

1.Press the appropriate softkey to select from:

•PRESET 1 SINGLE,

•PRESET 2 DUAL,

•PRESET 3 SHALLOW or

•PRESET 4 DEEP

After a few moments, the fishfinder display will change to the new mode. This is indicated in the top left-hand corner of the status bar.

12.4 Fishfinder display modes

Selecting a fishfinder display mode

When a fishfinder preset is selected, its softkey label changes to ADJUST. Pressing this softkey allows you to configure the display mode settings to suit your requirements. (Changes to the display mode are saved with the preset at power-off.)

From the fishfinder main screen:

1.Press the appropriate ADJUST... softkey.

2.With dual frequency screens select FREQ1 or FREQ2 to select which frequency display you wish to change.

3.Press the SELECT VIEW softkey.

4.Use the trackpad up/down to select the required display mode:

•None,

•Zoom,

•Bottom Lock or

•A-Scope

5.Press OK when complete.

Fishfinder zoom mode

The zoom display mode magnifies a region of the fishfinder screen to display more detail.

This zoom option enables you to:

•Replace the standard fishfinder image with the zoomed image, or display the zoomed image alongside the standard fishfinder image.

•Set the zoom factor to a predefined level, or adjust it manually.

154 C-Series Widescreen user reference