10.4 Enabling or disabling AIS

1.To enable AIS in the chart application:

i.Press the PRESENTATION softkey.

ii.Press the CHART LAYERS softkey.

iii.Press the CHART LAYERS softkey.

iv.Press the AIS OBJECTS softkey repeatedly until the ON option is selected.

v.Press the OK button.

2.To enable AIS in the radar application:

i.Press the PRESENTATION softkey.

ii.Press the AIS LAYER softkey repeatedly until the ON option is selected.

iii.Press the OK button.

10.5 Displaying AIS vectors

You must have the correct data available before AIS vectors can be displayed.

A target is defined as active when it has the following data displayed graphically:

A COG/SOG vector indicating the predicted distance that a target will travel within a given period of time.

A heading and direction of turn indicator.

Enabling and disabling AIS vectors

In the chart or radar application:

1.Move the cursor over the relevant AIS target.

2.Press the AIS VECTOR softkey until the ON or OFF option is selected, as appropriate.

3.Press the OK button.

Note: The same target vector and safe zone settings apply to both radar MARPA and AIS targets.

Using AIS

137

Page 137
Image 137
Raymarine C140w, C90w manual Enabling or disabling AIS, Displaying AIS vectors, Enabling and disabling AIS vectors