1.Press the PRESENTATION softkey.
2.Press the RADAR MODE AND ORIENTATION softkey.
3.Using the ORIENTATION softkey, select the required orientation mode.
Changing the radar vessel offset
In the radar application:
1.Press the PRESENTATION softkey.
2.Press the RADAR MODE AND ORIENTATION softkey.
3.Using the VESSEL OFFSET softkey, select the required vessel offset.
Radar motion modes overview
The motion mode controls the relationship between the radar and your boat. There are two modes:
•Relative motion.
•True motion.
The selected motion mode is displayed in the status bar. The default setting is relative motion with zero offset.
Relative Motion (RM) with optional Vessel Offset
When the motion mode is set to Relative, the position of your boat is fixed on the screen and all the targets move relative to the boat. You can specify whether the boat is fixed in the centre of the window (0 offset) or offset by 1/3 or 2/3 to increase the view ahead, as shown below:
The default motion mode is “Relative”, with zero offset.
True Motion (TM)
When the motion mode is set to True, fixed radar targets maintain a constant position and moving vessels (including your boat) travel in true perspective to each other and to fixed landmasses on the screen. As the boat’s position approaches the edge of the screen, the radar picture is automatically reset to reveal the area ahead.
Note: If heading and position data become unavailable when True motion is selected, a warning message will be shown, the mode will revert to relative motion and be noted in the status bar in brackets, for example, (TM).
Note: It is not possible to select True Motion when the orientation is set to Head Up.
Selecting the radar motion mode
In the radar application:
1.Press the PRESENTATION softkey.
2.Press the RADAR MODE AND ORIENTATION softkey.
3.Using the MOTION MODE softkey, select the relevant mode.
108 |
|
