Menu Item | Description | Options |
Shallow Depth Alarm | If the Shallow Depth | 0002 ft to maximum |
Value | Alarm is set to ON, an | transducer range |
| alarm is triggered if the |
|
| depth drops below the |
|
| value you specify. |
|
Deep Depth Alarm | Deep Depth Alarm | OFF, ON |
| Switches the deep depth |
|
| alarm on or off. If a DSM |
|
| is not connected, this |
|
| cannot be set. |
|
Deep Depth Alarm Value | If the Deep Depth Alarm | 0002 ft to maximum |
| is set to ON, an alarm | transducer range |
| is triggered if the depth |
|
| exceeds the value that |
|
| you specify. |
|
12.9 Setting up your fishfinder
Opening the fishfinder setup menu
1.Make a fishfinder window active.
2.Press the MENU button.
3.Select Fishfinder Setup from the list of options.
Fishfinder setup menu options
This section describes the settings you can change using the fishfinder setup menu. The setup menu contains settings that are likely to be changed infrequently.
Menu Item | Description | Options | |
Configure Preset | Enables you to adjust | AUTO or manual | |
Frequencies | the frequencies used | frequencies. | |
| for the four fishfinder |
|
|
| presets. For each |
|
|
| preset, you can select |
|
|
| AUTO for fully automatic |
|
|
| selection, or you can |
|
|
| manually specify the |
|
|
| frequency. You can |
|
|
| also reset all the |
|
|
| preset frequencies to |
|
|
| the factory defaults if |
|
|
| required. |
|
|
Depth Digit Size | Size of the digit that | • | Small |
| indicates the depth. | • | Medium |
|
| ||
|
| • | Large |
|
|
|
|
166 |
|
