Tuning method | Related Options | Description |
the tuning. Adjust the control to obtain the maximum signal strength. If you adjust the setting shortly after powering up the radar scanner, you should adjust it again approximately 10 minutes after powering up the scanner, as the required setting
will change after the magnetron has warmed up.
Adjusting analog radar gain
In the radar application:
1.Press the GAIN softkey.
2.Press the GAIN softkey repeatedly until the MAN option is selected.
3.Using the rotary controller, adjust the gain control to the appropriate setting (between 0 and 100%).
4.Press the OK button.
Adjusting analog radar FTC function
In the radar application:
1. Press the GAIN softkey.
2.Press the FTC softkey repeatedly until the ON option is selected.
3.Using the rotary controller, adjust the FTC function to the appropriate setting (between 0 and 100%).
4.Press the OK button.
Adjusting analog radar rain function
In the radar application:
1.Press the GAIN softkey.
2.Press the RAIN softkey repeatedly until the ON option is selected.
3.Using the rotary controller, adjust the Rain function to the appropriate setting (between 0 and 100%).
4.Press the OK button.
Adjusting analog radar sea gain
In the radar application:
1.Press the GAIN softkey.
2.Press the SEA GAIN softkey repeatedly until the MAN option is selected.
3.Using the rotary controller, adjust the Sea Gain to the appropriate setting (between 0 and 100%).
4.Press the OK button.
Selecting the enhance echoes functions
Enabling radar interference rejection
In the radar application:
118 |
|
