5.5 Waypoint navigation
Navigating to a waypoint using the WPTS MOB button
1.Press the WPTS/MOB button.
2.Press the GOTO WAYPOINT OPTIONS softkey.
3.Select the required waypoint from the list.
4.Press the GOTO WAYPOINT softkey.
Navigating to an existing waypoint selected on screen
In the chart application:
1.Position the cursor over the required waypoint.
2.Press the GOTO WAYPOINT softkey.
The chart displays a dashed line from your vessel to the active waypoint, and navigation commences.
Note: When you arrive at your target waypoint, a message will appear, and an alarm will sound. To acknowledge the message and silence the alarm, wait 10 seconds or press
ACKNOWLEDGE.
To stop navigating to a waypoint
1.Press the WPTS/MOB button.
2.Press the GOTO WAYPOINT OPTIONS softkey.
3.Press the STOP GOTO softkey.
4.Alternatively, position the cursor over the active waypoint, and press the STOP GOTO softkey.
Note: Once navigation is no longer active, the waypoint symbol returns to its normal unboxed state, and the dashed line between your boat and the waypoint is removed.
Using waypoints | 43 |
