
14.1 Data application overview
The data application displays system and instrument data on your multifunction display.
The data application enables you to view numeric data generated by the system. It also shows data from instruments connected to your multifunction display using the NMEA or SeaTalk protocols.
14.2Pre-configured data in the data application
By default, the data application displays a
Note: Panel selection is a local setting, and therefore only affects the individual display that you are currently using. It does not affect any networked displays.
List of pre-configured data panels
A range of
The following table shows the data displayed by each type of panel. Each data item listed in the table below represents a ’cell’.
Note: Panel selection is a local setting, and therefore only affects the individual display that you are currently using. It does not affect any networked displays.
In the following table, Y=YES, N=NO.
|
| Way- |
| Fish- | Sail- |
| Naviga- | point | Route | ing | ing |
Data | tion panel | panel | panel | panel | panel |
Vessel | Y | Y | Y | Y | N |
Position |
|
|
|
|
|
Active | Y | Y | Y | Y | N |
Waypoint |
|
|
|
|
|
TTG | Y | N | N | N | N |
|
|
|
|
|
|
176 |
|