A range of vector graphics can be superimposed on to the chart display. The following vectors can be independently enabled or disabled:

HDG (heading) vector — shows the vessel’s heading, displayed as a line with an open arrow head. It does not take winds or tides into account.

COG (Course Over Ground) vector — indicates the vessel’s actual course, and is displayed as a line with two open arrow heads.

Wind and tide vectors — winds and tides are displayed as lines with solid arrow heads in the direction of the wind or tidal set. Wind arrows point towards your vessel, and tidal arrows point away. The width of the arrow indicates its strength.

Note: The length of the HDG and COG vector lines is determined by the distance your vessel will travel in the time you have specified (3 mins, 6 mins or Infinite) in the Chart Setup Menu at the current speed. Any times that you specify will apply to all chart views, and if theInfinite option is selected, the vector will extend to the edge of the chart window.

Note: If neither Speed Over Ground (SOG) or heading data is available, vectors cannot be displayed.

Enabling and disabling chart vectors

1.Press the DATA button.

2.Press the CHART VECTORS softkey.

3.Press the appropriate softkey to enable or disable the chart vectors you want to use.

Decluttering the chart

You can reduce the amount of detail shown on the chart by de-cluttering the chart display.

If there are a large number of cartographic objects in a particular area, you can turn on the declutter option to hide the following cartographic objects:

Text.

Chart boundaries.

Spot soundings.

Depth contours.

Light sectors.

Caution and routing Data.

Land and marine features.

Business services (if available for your cartography).

Decluttering the chart display

In the chart application:

1.Press the PRESENTATION softkey.

2.Press the DECLUTTER softkey and select the ON option.

Displaying details of tides and currents

Displaying details of tides

In the chart application:

1.Using the trackpad, position the cursor over the diamond-shaped tidal symbol.

2.Press the OK button to display information for that tide.

3.To display additional tidal data, press the TIDAL DATA softkey.

4.To move the time selector, use the trackpad.

68

C-Series Widescreen user reference

Page 68
Image 68
Raymarine C90w Decluttering the chart, Displaying details of tides and currents, Enabling and disabling chart vectors