Note: To abandon the group default change operation, press
CANCEL.
Erasing a waypoint group
1.Display the Waypoint Group list:
i.Press the WPTS MOB button.
ii.Press the REVIEW AND EDIT WAYPOINTS softkey.
iii.Press the WAYPOINT GROUPS softkey.
2.Using the trackpad, select the waypoint group that you want to erase.
3.Press theERASE GROUP softkey.
4.Press the YES softkey to confirm.
Showing and hiding waypoint groups
In the chart application:
1.Press the PRESENTATION softkey.
2.Press the SHOW/HIDE WAYPOINTS softkey.
3.Using the SHOW BY softkey, select the SHOW BY GROUP option.
4.A list of available waypoint groups is displayed. Using the rotary control, select the waypoint group that you want to show or hide.
5.Using the ON CHART softkey, select the SHOW or HIDE option, as appropriate.
6.Repeat Steps 4 to 5 for each waypoint group you want to show or hide.
5.8 Password protecting your waypoints
You can prevent access to, modification, and visibility of your waypoints and routes by applying a password.
Password Confirmation
When Password Protection is enabled and you are attempting to access a password protected function for the first time during a
•Access WPTS key functions. This does not affect the operation of the MOB function.
•Access ROUTE softkey functions.
•Create a route from a track. All other track functions are unaffected.
•Archive or transfer any waypoints.
•Enter the Waypoint Password Setup menu.
Note: Once you have provided a password to the system, it must be entered to access the Password Setup
Note: Raymarine strongly recommends that you backup your waypoint data BEFORE password protecting your waypoints. This is so that, in the event that you forget your password, you can easily restore your waypoints.
Disabled Data/Functions
When Password Protection is ON and you have not entered a password, you will NOT be able to:
•View details of waypoint and route databases.
•Edit waypoints or routes.
Using waypoints | 47 |
