•Reposition the zoomed portion of the image to a different point in the display.
When the range increases, the area shown in the zoom window also increases.
Zoom split
With the zoom display mode you can split the screen and display the zoomed image alongside the standard fishfinder image (ZOOM SPLIT). The zoomed section is indicated on the standard fishfinder screen by a zoom box.
Enabling fishfinder zoom mode
From the main fishfinder screen:
1.Press the appropriate ADJUST... softkey.
2.With dual frequency screens select FREQ1 or FREQ2 to select which frequency display you wish to change.
3.Press the SELECT VIEW softkey.
4.Use the trackpad to select the ZOOM option.
5. Press the OK button.
Selecting zoom split screen
With the fishfinder in zoom mode:
1. Press the ZOOM softkey to select FULL or SPLIT as required.
Adjusting the fishfinder zoom factor
When the zoom function is active (ZOOM FULL or ZOOM SPLIT), you can either select a predefined zoom factor or adjust it manually.
With the fishfinder in zoom mode:
1.Press the ZOOM FACTOR softkey to toggle between predefined settings or select xR to set a factor manually. For manual settings, adjust the zoom factor with the trackpad.
2.Press the OK button.
Adjusting the position of the fishfinder zoomed area
When the zoom function is selected, the system automatically selects the zoom position so that the bottom details are always in the lower half of the display. If required you can reposition the portion of the image to be zoomed so that an alternative area is displayed.
With the fishfinder in zoom mode:
1.Press the ZOOM POSITION softkey until the MAN option is selected.
2.Use the rotary control to reposition the zoomed area as required.
3.Press the OK button.
Fishfinder A-Scope mode
The
Using the fishfinder | 155 |
