Password
It is stronglyrecommended that you set a password for the Router. When you
first power up the Router, there is no default Password setting assigned.
If you leave the password field blank, all users on your network will be able to
access the Router simply by entering the unit's IP address into their web brows-
er's location window.
If you select the Restore Factory Default option and click the Apply button,
you will clear all of the Router’s settings.
Do not restore the factory defaults unless you are having difficulties with the
Router and have exhausted all other troubleshooting measures. Once the Router
is reset, you will have to re-enter all of your configuration data.
Status
EtherFast Cable/DSLRouters
40
Instant Broadband Series
39
This tab displays the current status of the Router; it reflects the data and selec-
tions you’ve entered under the Setup tab.
All of the information provided on this screen is read-only. To make changes,
select the Setup tab.
• Host Name This f ield shows the name of your Router. This entry is neces-
sary for some ISPs.
• Firmware Version This f ield shows the installed version and date of the
firmware. Version dates are slightly more accurate than version numbers.
• Login This field shows whether you have enabled the use of the Router’s
PPPoE (Point-to-Point Protocol over Ethernet) support.
• LAN These f ields display the current IP Address and Subnet Mask of the
Router, as seen by users on your internal network. DHCP Servershows
the status of the Router's DHCP server function, which is either enabled or
disabled.
Status
Password