Linksys EtherFast® II Series

6.When you finish, press the Esc key from the Line Speed & Flow Control screen to return to the LAN Port Configurations screen.

Changing the Flow Control

1.With the Speed & Flow Cntl Options screen displayed, press the Down Arrow key to highlight Flow Control and press Enter. The Flow Cntl Options screen will appear.

2.Highlight the desired flow control option for the port. Auto allows the GigaSwitch to automatically determine whether or not to use flow control. On enables flow control at all times. Off disables flow control at all times.

3.Press Enter. You will return to the Speed & Flow Cntl Options screen, and the selected flow control setting will appear next to Flow Control.

4.To configure the flow control for additional ports, press Esc to remove

the Speed & Flow Cntl Options screen. Highlight the desired port then press Enter. Highlight Speed and Flow Control, then press Enter. Repeat steps 1 through 3 for each additional port.

5.When you are finished, press the Esc key from the Line Speed & Flow Control screen to return to the LAN Port Configurations screen.

Displaying Physical Port Address

The following procedure describes how to display the physical port address. This option only appears on the LAN Port Configurations screen when System MAC Address in the General screen is set to Multiple. The addresses of each individual port will be displayed.

1.From the LAN Port Configurations screen, highlight Physical Address and press the Enter key. A screen similar to the following (see next page) will appear.

10/100 Managed 24-Port GigaSwitch

Returning to the Basic Management Screen

After completing the general management activities, press the Esc key to exit the General screen and return to the Basic Management screen. You can then select another option from the Basic Management screen or press Esc to return to the Switch Management screen.

Console Port Configuration

Select Console Port from the Basic Management screen, the Console Port Configurations screen will appear, with the Baud Rate value highlighted.

Use the procedures in this section to configure the Console Port Configurations options for one or more settings, including:

Specifying Baud Rate

Specifying Flow Control

Enable or Disable Modem Control

Enter Modem Setup String

Enable or Disable SLIP

Specify a Slip Address

Specify a SLIP Subnet Mask

20

21

Page 14
Image 14
Linksys EG24M manual Console Port Configuration, Changing the Flow Control, Displaying Physical Port Address

EG24M specifications

The Linksys EG24M is a powerful and versatile network switch that caters to the needs of both small and medium-sized businesses. With its robust features and reliable performance, the EG24M has established itself as a go-to choice for enhancing network connectivity in diverse environments.

At the heart of the Linksys EG24M are 24 Ethernet ports, all of which support Gigabit speed. This allows for rapid data transfer rates, making it ideal for bandwidth-intensive applications such as video streaming, online gaming, and large file transfers. All ports are auto-sensing and configure themselves automatically to the speed of connected devices, optimizing performance without the need for manual configurations.

One of the standout features of the EG24M is its support for Power over Ethernet (PoE). This technology enables the switch to deliver electrical power along with data over standard Ethernet cables, eliminating the need for additional power supplies for PoE-enabled devices like IP cameras, VoIP phones, and wireless access points. This simplifies installation and reduces clutter, allowing for flexible deployments in various environments.

The Linksys EG24M also incorporates advanced Layer 2 switching capabilities. It supports features such as VLANs (Virtual Local Area Networks), allowing network segmentation to enhance security and traffic management. This is particularly beneficial in larger networks where different departments or functions require isolated communication channels. Additionally, the switch supports Quality of Service (QoS) features, enabling prioritization of critical network traffic to ensure smooth performance for essential applications.

Security is another key aspect of the Linksys EG24M. It has built-in features to protect the network against unauthorized access, ensuring that sensitive data remains secure. The switch also supports storm control and broadcast control to mitigate network congestion and enhance overall performance.

In terms of design, the EG24M features a compact and robust form factor, which makes it suitable for mounting in standard racks or desktop environments. Its fanless design ensures silent operation, making it ideal for office use where noise can be a distraction.

In conclusion, the Linksys EG24M is an efficient and reliable network switch that combines high-speed connectivity with advanced features like PoE, VLAN support, and enhanced security. Its design and capabilities make it a valuable asset for any business looking to improve its network infrastructure. With Linksys backing its technology, the EG24M is poised to deliver exceptional performance and reliability for diverse networking needs.